The SpeedyBee F405 Stack – F405 V3 FC + 50A 3-6s BLHeli_S 4-in-1 ESC – 30×30 features Bluetooth Pairing & Configuration, Onboard 4-level Battery Indicators, 1500uF Filtering Capacitator, Built-in Barometer, to name a few. It also offers 4x UARTS, 5V 2A &9V 2A individual BECs, Wireless Motor-direction Changing, 4x LED Strips Soldering Pads, 4GB Max Blackbox SD Card Slot, and 8 Motors Support.
Features
F405 V3 FC
- Processor and Sensors
- STM32F405 ARM microcontroller
- V3:BMI270 IMU, V4:ICM42688 (Gyro and Accelerometers)
- V3:SPL06, V4:DPS310 Barometer
- AT7456E OSD
- Interfaces
- 9x PWM outputs (PWM9 for Neopixel LED)
- 1x RC input (PWM/PPM, SBUS)
- 6x serial port inputs (including RC input listed above)
- 1x I2C for external compass or airspeed sensor
- Micro SD card slot
- 4 in 1 ESC connector
- DJI Air Unit connector
- USB-C connector
- Power
- 9V ~ 25V DC input power (3S-6S)
- 5V 2A BEC for peripheral
- 9V 2A for Video
- Size and Dimensions
- 41.6mm x3 9.4mm x 7.8mm (30.5mm x 30.5mm mount pattern)
- 9.6g
- Dedicated DJI Air Unit connector for a quick digital build
- Power your GPS with a USB cable – no battery needed.
- 4 x UARTs for your receiver + VTX + camera + GPS.
- SD Card slot can support up to 4GB Blackbox data*
- 22mm cutouts for FPV camera in your tight build
- 9V 2A + 5V 2A individual BECs
- 4-level LED battery indicator
- m1-m8 ESC signal
- Built-in barometer
- Bluetooth pairing
50A 3-6s BLHeli_S 4-in-1 ESC
- Wireless Configuration: Full Configuration Supported in the SpeedyBee app
- External Capacitor: 1500uF Low ESR Capacitor(In the package)
- PC Configurator Download Link: https://esc-configurator.com/
- Mounting: 30.5 x 30.5mm( 4mm hole diameter)
- Current Sensor: Support (Scale=386 Offset=0)
- Dimension: 45.6(L) * 44(W) * 6.1mm(H)
- ESC Protocol: DSHOT300/600
- Continuous Current: 50A * 4
- TVS Protective diode: Yes
- Firmware: BLHeli_S JH50
- Burst Current: 55A(5S)
- Power Input: 3-6S LiPo
- Power Output: VBAT
- Weight: 13.8g
Reviews
There are no reviews yet.