Holybro Micro Power Module

This PDB has 5v output 3A output

Integrated voltage & current sensor for flight controller

UBEC Maximum Input Voltage: 7~42V（10S LiPo）

PCB Maximum Continuous Current:120A

Holybro Micro Power Module (PM06 v2)

PCB Current: 120A continued
UBEC Current: 3A Max
Power input: DC 7V~42V(2S~10S)
Power output: DC 5.1V~5.3V
Dimensions: 35x35x5mm
Mounting hole: 30.5mm*30.5mm
Weight: 24g

Make the PM06 show the quantity of electric charge of your battery
Mission Planner setup:

• Connect PM06 to the battery, also connect it to Mission Planner via USB.
• Click “INITIAL SETUP” and come to the menu “Battery Monitor”.
• Make “Monito” into “Analog Voltage and Current”.
• Make “Sensor” into “9: Holybro Pixhawk4 PM”.
• Make “HW Ver: “The Cube or Pixhawk” （pixhawk4,pixhawk4mini,pix32v5,pix32）”※
  “HW Ver:  Leave this blank（Durandal）”※
• Input “18.182” into Voltage divider (Calced).
• Input “36.364” into “Amperes per volt”.
• Disconnect and reconnect it to finish the setting up.（“Measured battery voltage” shows the current quantity of electric charge of the battery.）